For those of you who own a Roto-Baler, do you want to know what year your machine was made? First off you need to find the location of the serial number on your baler. If you have a manual for the machine it tell you where to find the number. For those of you who don’t have the manual this picture should help guide you.
The number will be stamped into the metal. Sometimes the metal will be rusty, so take a wire brush or steel wool to clean the surface if the numbers are hard to read. The number can be as short as three digits (XXX) and as long as five digits (XXXXX). Once you have that number you can cross reference it to the year it was made. If you have Norm Swindford’s book, Allis-Chalmers Farm Equipment 1914-1985, he has the listed serial numbers and year associated with the number, this is located on page 299. For those of you who do not have the book, I have taken the time to transfer the information from the book onto a PDF. Click the picture below to view the list in a larger window.
I’d be interested to catalog and share the number Roto-Balers that are still left out there (out of approx. 78,000 built). If you would kindly take the time to fill out the form below, I will compile the information and post the findings. If you need any help setting up your Roto-Baler, or if you have any other questions feel free post a comment below. I also have some connections with people who are very good with these machines, I would be willing to pass your questions along to them.